MATERIAL PLUS

The software is used in Metallurgical Lab to study powder Metallurgy, To study Metallurgical Microstructures, Cast Iron industry, Carbon steel industry, Grain in carbon steel industry, Copper Brass industry, Aluminum casting industry, effective case depth measurement, Decarburization measurement, Nitriding layer, Coating thickness, carburized layers measurement, Graphite flakes Analysis, pearlite / Ferrite / Carbide / Retain Austenilo, Porosity in Aluminum casting, porosity in steel, crack measurement etc

MICROHARDNESS PRO

The software is useful for Macro & Micro hardness Testing. The available methods are Brinell, Vicker & Knoop measurement.

TEXTILE PRO

This software is dedicated to only TEXTILE industry, TEXTILE research institute, TEXTILE testing labs.

PHARMA PRO

This software is specially designed for Pharmacauted industry, Pharmacies, Pharmacology dept. to analysis and measures various parameters of PARTICLES.

BIOWIZARD

Specifications :
BIOWIZARD Ver 4.1 is a new generation image analysis software meant for scientist to do analysis in the simplest way. This is a single screen window based system. The system is flexible, independent to adopt any capture card, camera and Microscopes.

BIOWIZARD can handle monochrome (8 bits) and color (24 bits) images. Multiple images of any size can be opened and displayed on the screen for analysis or comparison. The software support most common formats BMP, JPEG, TIFF, PNG, and GIP & PSD. The full screen real time image can be observed and captured on the same platform. Since system is made in window environment, graphs and charts displayed on the monitor can be quickly transferred into other window-based program like MS Word, MS Excel or any other commercial window based software for the use in reports and presentation.

MEASUREMENTS
(a) Sportial Calibration (b) Line Measurements for Distance, Length, Width, Perimeter, Angle, Three point Radius. (c) Area by enclosed line controlled by four arrow keys available on the keyboard arrow with zoomed preview. The Line measurement is not effected on zoomed images.

COUNT & CLASSIFICATION
Identification of objects in an image, count them, obtain several features measurements. Objects identification by user or automatically. User defined classification on basis of size or intensity.

THRESHOLD PARTICLE
Manual, Auto bright and Auto dark methods to identify intensity range defined object to be measured. Various calculation & measurements available for selected Particle are; Dimensions, Area, Perimeter, Ferrite Length, Min/ Max Radius, Thread Length, Thread Width, Fiber Length, Fiber Width.

MORPHOMETERY
Roundness, shape, Orientation, Elongation, Equal Circular Diameter, Equal Sphere Volume.

LOCATIONAL
Centroid X, Centroid Y, Major X1, MajorY1, Minor X1, MinorY1, Major X2, MajorY, Major X2, MinorY2, Box X1, X2, Box Y, Y2 & Box Area. Measure area fraction & Volume fraction. Identify multiple phases within Microstructure. Also delineate phases from the histogram.

(a) Three Options: Direct Print out with Original image & Tabular Results.
(b) Export to MS Office (c) Excel for further modification.

WELD CHECK

Specifications :
Weld Check software is a powerful easy-to-use tool that enhances your ability to quickly and efficiently handle your most critical welding measurement and documentation software needs. Your workflow and productivity are greatly improved. Weld Check has been designed with your welding cross-section measurement needs in mind. Weld Check’s measurement module allows you to quickly measure such items as your fillet welds, throat, leg lengths and penetration. Use Weld Check Measurement Tolerance indicator to improve performance by having the software automatically tell you if a measurement is out of the tolerance range.

The following report concerns the analysis of a fillet weld, a weld of approximately triangular cross section joining two surfaces at approximately right angles to each other. Important measurements made by the distance from the root if the fillet to the center of the face (or throat), the distance from the root of the joint to the junction between the exposed surface of the weld and the base metal (or leg), the angles and the root penetration.Measurements that could have been done with the same ease or similar sample are among others : depth of HAZ (heat affected zone), area of HAZ, joint penetration, phase counting, etc.

The measurement remain uneffected if the image is zoomed for better accuracy. T he magnifier tool is also available which can be switched on any part of image. The tool zooms only the region surrounding the cursor allowing to increase the drawing precision while still seeing the whole sample.

Image analysis system can measure a sequence of specific characteristics or welded parts. The system brings the good tool with the good color when it’s the time for the operator to use it.

CALIPER PLUS

Specifications :
This software is powerful for acquiring, organizing, storing, retrieving and editing any image. It handles different image formats BMP, TIFF, IMG, IMF, GIF, PCX, JPEG, PIC. It support many cameras, frame grabbers and other USB-1, USB-2 & twain input devices. The Software provide user friendly platforms to measure length, width, height, thickness, perimeter, radius, angle, area etc on an object captured from any source. Creates customized reports with images, data & text.

PHARMA PRO

Specifications :
The use of microscopic image analysis system is the most reliable technique to characterize particle shape and to characterize a particle size and volume distribution. Tradition method, such as laser diffraction, although efficient, gives limited information on particle shape. The particle size, distribution and shape of the particles can effect bulk properties, product performance, process ability, stability and appearance of the end product in Pharma industry.

The software is useful to measure and analyse the particle size, particles shape, particle count, foreign particle detection, particle structure, homogeneity, surface coatings thickness. For spherical particles (which are rarely uncounted in pharmaceutical powders) the diameters are sufficient to describe the particle size. For non-spherical particles, feret's diameter, Particle orientation, Particle shape, elongation, convexity, circularity, circle equivalent diameter are measured.

This software is also useful to study the polarizing effects which study the cross section through pharmaceutical tablets by preparing thin-sections on slide with UV curing adhesive for final polishing. The cross section reveal the spatial distribution of components in the tablets so that any post compression change (eg polymorph conversions or change in the hydration state of components) can be investigated.