CAPILLARY THERMOSTATE

The temperature sensor consists of probe, capillary tube, diaphragms and expansion medium. When the sensor is heated, the liquid medium heats up and expands. The expansion of the medium increases in the closed-circuit system. The pressure increase is converted into displacement in the diaphragm. This displacement, also called travel, actuates a snap-action switch, which opens or closes the contacts in the electric circuit. The reference variable is set via the thermostat’s adjusting spindle.

Application : Heating Oven, Cocking Appliances, Water Boilers, Frier, Electric Water Heater, Hot Beverage, Soldering Bath, Paraffin Wax Bath
Capillary Material : Copper, Stainless Steel
Capillary Length : Standard - 1000 mm (1 Meter); On Request - 250mm to 3000 mm (3 Meter)
Temperature Range : 30°C - 110°C & 50°C - 300°C & 2 °C - 85°C. Others on Request

For more details : Contact HSPL

ENERGY REGULATORS

Ajay Energy Regulators are recognized as robust and most reliable, providing a wide range of variants to match diverse applications such as Drying Cabinets, Wash Boilers, Boiling Rings, Hot Plates, Grills, Grill Boilers, Warming Cupboards etc.

Operation : Energy regulation is achieved by varying the duty cycle (ON and OFF periods) of power applied to the heating elements using a parallel thermal actuator driving a snap-action switching mechanism which opens and closes the load circuit at precise time intervals. The proportion of the time “ON” to “OFF” can be varied, regulating the average power input and assuring a smooth output of heat.The mounting of Energy Regulator is very simple and it is done by registering lugs and threaded Bush (M 10 X 1 mm), which is tightened by a single nut.

For more details : Contact HSPL

CIRCUIT BREAKERS

Ajay Circuit breakers are thermally operated overload protector, providing reliable position trip operation on overload and short circuit within the maximum breaking capacity. The trip mechanism is of a latch type with high contact force is maintained until the unit trip. This prevents contact bounce and reduces the risk of contact welding. Its components are produced with flame retardant engineering plastic, which has excellent impact resistance, combined with high stiffness and strength.

The mechanism of the circuit breaker is designed to open the contact in the event of a current flow in excess of the rated current according to the time / current characteristics of the device. A thermo bimetal strip, which has the advantage of being immune to high inrush currents and line transients, is heated by the over current and deflects, thereby releasing the latch mechanism. This mechanism gets open even if the reset button is manually held in closed position. This is known as positive trip mechanism. The contacts open and closes with a positive snap action. The tripped stat is clearly indicated by the extended projection of the “Red” resent button.

Applications : Main applications are protection of single phase motors, Transformers, UPS, Power Strips, Solenoids etc.. against damage due to over current conditions.

Std. Current Ratings in Amps.
1.0, 1.2, 1.5, 1.8, 2.0, 2.2, 2.5, 2.7, 3.0, 4.0, 6.0, 8.0, 10.0, 12.0, 15.0, 16.0

Rated Voltage - 240 V AC & 24V DC

For more details : Contact HSPL

ROD THERMOSTATE

Application : Water Heater

Operation : The deifferenial expansion of the bimellatic sensitive element causes the opening of snapaction switch located in the thermostat head.

Standard Temperature Range: 5 °C - 80°C & 0°C - 65 °C & 45°C - 120 °C.
Standard Temperature Range: 7 °C
Stem Length : 7 (170 mm ) & 11 Inches ( 260 mm )
Electrical Connections : Pillar terminals
Mounting : Directly into element pocket or with spring clip

For more details : Contact HSPL

SELECTOR SWITCHES & IRON THERMOSTATS